2018 J Boats J/121

Hull & Deck

• J/121 hull & deck are vacuum-infused molded (SCRIMP process) in temperature controlled environment with biaxial

and unidirectional E-glass fabrics using end grain balsa core in the hull for rugged durability and Corecell foam core in

the deck for light weight. High density core inserts and additional glass reinforcements are placed in way of highly

loaded hardware and components.

• Laminates are engineered and built to exceed ISO 12215 Cat A and ABS structural standards.

• White gelcoat hull

• Molded companionway seahood with slider.

• ORC molded-in toe-rails forward of the mast.

• GRP molded main bulkhead – structurally bonded and tabbed to the hull and deck with single large opening to

forepeak.

• Two watertight bulkheads (one in the forepeak and one forward of the steering system) bonded and tabbed to the

hull and deck.

• Heavy duty molded fore/aft and transverse keel support grid, with substantial composite structural beams.

• Composite mast bearing beam with carbon fiber compression post, bonded and fastened to the deck.

• High aspect, low VCG "IRC" keel with lead ballast and epoxy faired and finished fin, flange mounted to a hull

recess.

Mechanical & Steering

• Yanmar 3YM30ACE 3 cylinder 4-stroke 29hp diesel engine with 125 amp alternator and SD 25 Saildrive with 2-

piece split zinc.

• Yanmar keyless digital B instrument panel mounted in recess on cockpit wall near wheel

• Gori three blade, geared folding prop.

• Spinlock flush mount engine throttle control with removable handle and neutral safety switch.

• Balanced spade, composite rudder with stainless rudder post mounted in self aligning, Jefa rudder bearings w/ Jeffa

Pilot Drive

• Jefa twin pedestal steering system including sheaves, radial drive, needle bearings, and integral wheel brake.

• Carbonautica custom composite wheels (2) finished in black Awlgrip.

• Emergency tiller.

Deck Hardware

• Harken Performa 52:1 self-tailing primary winches.

• Harken Performa 46:1 self-tailing cabin top winches.

• Harken Performa 46:1 self-tailing mainsheet winches.

• Four Harken One-touch winch handles.

• 6:1 Harken traveler system on cockpit floor.

• Adjustable jib lead system with floating lead blocks and inhaul and outhaul capability.

• Cascading cunningham system led to cockpit.

• Harken spinnaker sheet and tack line blocks.

• Bow-sprit control system led externally to clutch mounted on cabin top.

• Mast base halyard blocks and organizers.

• Halyard & tack line rope clutches.

• Custom mast collar with attachment points for halyard and mast base blocks, and halyard bale.

• Stainless cabin top handrails P&S.

• Tapered SS lifeline stanchions. Forward stanchion with integral roller (P&S) for quick jib skirting. Double 1x19

stainless wire lifelines to meet all categories of the Offshore Special Regulations (OSR).

• Custom bow pulpit and dual corner stern rails with LED navigation lights.

• Antal Bow Cleats & Pop Up Aft Cleats

• Interior ventilation from four framed opening ports in sides of cabin trunk, one offshore skylight deck hatch aft of

mast, and one large offshore deck hatch forward of the mast.

• Acrylic offshore drop-board with inside/outside lockable hasp.

• Four polypropylene mesh line bags.

• Custom SS forestay, shroud and backstay chainplates.

Plumbing & Electrical

• 24-gallon fuel tank with baffles and inspection port & additional 12 gallon fuel tank

• 12-gallon head holding tank.

• Raritan PH-II head with deck pump-out.

• Manual fresh water system with 26-gallon water tank and manual pumps and spigots in the galley and head and

Whale 6 gallon hot water tank.

• Cockpit operated manual bilge pump.

• Three105 amp deep-cycle, Group 31 sealed AGM batteries.

• Three position battery switch.

• Electrical panel w/circuit breakers.

• Bonding system.

• Five low profile, LED reading lights.

• One adjustable red/white light in Nav station

• Six red/white LED dome lights

• Automatic bilge pump with manual/auto panel switch & Whale Supersub 12v 1100gph Low Profile Automatic bilge

pump

• Below deck OSR manual bilge pump.

Spars & Rigging

• Carbon fiber, auto-clave cured mast with double swept back spreaders, backstay crane, flush shroud terminations,

sheaves for 1 main, 1 inner jib/staysail, 2 jib & 2 spinnaker halyards, vang and boom gooseneck fittings,

steaming/foredeck light, masthead anchor/Tri-color light, internal wiring conduit, aluminum masthead bracket for

owner provided wand. Antal mast track and loader gate. Mast/boom finished in black with contrasting white

measurement bands.

• Carbon fiber, racing boom with 12:1 internal outhaul, one mainsheet block bale, vang lug, and sheaves for two reef

lines and outhaul.

• Nitronic 50 discontinuous rod rigging package including shrouds and forestay.

• Adjustable open body shroud turnbuckles.

• DSK-90 Dyneema backstay connected to Harken integral hydraulic backstay adjuster operable on centerline just aft

of the helm.

• Jib roller furling system.

• Carbon fiber bow sprit with internal bearing system and black painted finish. Fully extended position is supported

by a Dyneema bobstay. Stored position is retracted aft of the stem for safer docking and maneuvering.

• Running rigging package with GP78 Main halyard, V100 Jib halyard, GP78 spin/Code 0 halyard, one Inner Jib

Halyard with integral halyard lock, 2nd spinnaker halyard, one mainsheet, two reef lines, two jib sheets, and two

spinnaker sheets. Also includes cunningham, boom vang, outhaul, pole control, 2 tack lines, inhauler and floating jib

ring lines, and traveler control lines.

• Rigid boom vang with control lines led P&S to cockpit.

Sails - Complete UK inventory - New 2018 - (used two seasons)

Mainsail - Uni-Titanium LS w/three reefs

Delivery mainsail - 90oz CB Dacron w/ four battens

J1, J2, J3 - Uni Titanium LS

Code Zero - CZ 30 w/top down furling cable

A1 VMG - Superkote 60

A2 Runner - Superkote 75

A3 Reacher - Superkote 90 w/top down furling cable

A5 Runner - Superkote 90

Storm Jib and Trysail - 10oz CB Orange Dacron - (Storm jib w/ furling cable)

Electronics & Navigation - Complete B&G Custom System

B&G H5000 Hercules Base Pack

2 - B&G H5000 Graphic Displays

2 - B&G Triton Digital Displays

3 - Garmin GNX 120 7" displays in a Garmin Carbon Fiber mast mounted bracket with Garmin GNX Keypad

B&G 32" Vertical Masthead Unit

Airmar DX900 Multi Log Sensor

B&G /Simrad DT800 Depth/Speed N2K

B&G H5000 3D Motion Sensor

2 - B&G Zeus3 9" MFD @ Nav Station

2 - B&G Zeus3 - 12" MFD with custom pedestal @ each wheel

Boradband 4G Radar Bundle for B&G Zeus Series

Custom Seaview Carbon Fiber Radar Pole 10' w/ deck tube

Custom radar platform for radar dome and 5 antennas

Navico WM-3 Sirius XM Satellite Weather & Radio Module

B&G ZG100 GPS antenna - 10Hz

B&G H5000 Pilot Controller & Computer

Simrad WR10 Wireless Remote

B&G Precision-9 Compass

Simrad RF25N N2K Rudder Feedback

Icom M506 VHF Fixed Mount

Standard Horizon HX870 6W Floating handheld VHF Radio w/integrated GPS

Garmin AIS 600 Automatic Identification System

Iridium GO! Fixed Install Kit

Global Fix Pro 408MHz GPS EPIRB

Global Fix Pro 408MHz GPS EPIRB

Vesper VHF/AIS Antenna

Shakespeare 5241 VHF Antenna -36" Heavy Duty

EFOY Comfort 210 Fuel Cell Generator w/2 Cartridges

IRIS848 Hybrid Digital Video Recorder w/ IRIS 2MP Network IP Camera (Hi-Def)

Fusion BB300R Marine Black Box Stereo w/NRX300 Wired Remote

Bose 151 Environmental Speakers (2 in main salon)/Fusion 4" 150w Speakers in cockpit

Blue Sea 12v Dash Socket and 12/24v Dual USB Charger

Garmin BlueChart g2 Vision HD - VUS048R Bermuda microSD/SD

Navionics+ Preloaded Chart of all US/Canada - Marine & Lakes microSD

Navionics+ Caribbean & South America microSD

Interior

• Off-white, low-maintenance bulkheads.

• Molded engine box cover with 1” sound insulation.

• Walled-in companionway entrance with angled treads and grab rails for secure passage.

• Quarter cabin aft of the galley (port side) with double berth and storage below and an additional custom pipe

berth just aft of that.

• Low maintenance, synthetic, high-wear cabin flooring.

• SS overhead handrails in main salon P&S.

• Two large acrylic fixed portlights.

• Two 6’6” settee berths, each with a fold-up pilot berth outboard - for a total of four berths in the main cabin.

• Storage outboard of settee berth back rests.

• Sit-down, forward-facing nav station with two drawers & hinged-lid access to chart storage, outboard instrument

panel and storage bin.

• L-galley with sink, faucet, fresh water foot pump, sink drain seacock, ice box with top opening, gimballed LPG 2-

burner cooktop, and storage cabinet outboard with acrylic sliders.

• Walk-through aft head with sink, faucet, shower sump drain and under counter storage area.

• Large storage area and additional custom berth accessible through the head and via the starboard cockpit seat

locker.

J Boat Factory 121 Options

IRC Keel - 8'3" draft (no bulb) - offers similar performance with better rating

Molded Instrument Pod above companionway

Opening ports in cockpit and aft face of coachroof

Two Tone deck

Canvas and Cover Package

Jeffa Pilot Drive

Offshore Dodger - covers companionway

110v Shorepower

Gori 3 blade prop

Extra Battery (for total of three)

DC Fridge - Isotherm Compact

Systems Group - Hot & cold pressure water system with extendable shower in aft head

Domitec Origo 6000 alcohol 2 burner stove and oven

Chart table & head grab rails

Antal bow cleats and pop up aft cleats

Custom Options

EFOY Comfort 210 Fuel Cell Generator

Custom Fixed Sprit - for Code Zero and Flying Jib

Custom berth aft of head and additional custom pipe berth port side cabin aft

Salt Water Faucet plumbed at galley

8 man Life Raft with custom cradle mount in cockpit aft of helm

Custom additional hand rails in in forward cabin by hatch and port aft cabin

Custom aluminum pipe berth with block and tackle

Custom Pedestal Guard at helm

Whale Supersub 12v 1100GPH Low Profile Automatic Bilge Pump

Additional Equipment

Fortress Guardian G-23 Anchor with chain and rode, 2 Lifesling MOM, Loos Gauge Model RT-11, fenders, dock lines,

additional engine & mechanical spares, rigging and sail repair kits, and tool kit.

The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.

The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.