Details
Ticker is a Tripp 37, drawn by William Tripp III and built by Holby Marine. Only a handful of these boats were finished, and this one was completed in 1986. She is a masthead sloop with a fin keel and a spade rudder, built in fiberglass to be sailed hard and still lived aboard. She lies at Bayview Yacht Club in Detroit.
On deck she is a proper performance cruiser. Length is 37 feet, waterline 31 feet, and beam 12 feet. Draft is 6 feet 10 inches. Displacement is 12,034 pounds, with 5,400 pounds of ballast. The rig is the class masthead sloop, with a reported sail area of about 645 square feet.
Auxiliary power is a Yanmar 3GM30F diesel, 29 horsepower, driving through a V-drive to a folding propeller. There is no hour meter aboard, so no engine-hour figure is stated.
Below, the Tripp 37 is laid out as a racer that can cruise: a workable galley, a head, and berths for a small crew, finished in the straightforward way Holby built these boats. She is meant for club racing on the lakes and for a weekend passage, not for a marina that never leaves the dock.
Ticker is in Detroit, Michigan. Showings can be arranged by appointment.
SPECIFICATIONS
Name: Ticker
Designer: William Tripp III
Builder: Holby Marine
Model: Tripp 37
Year completed: 1986
Rig: Masthead sloop
Hull: Fiberglass, fin keel, spade rudder
Location: Bayview Yacht Club, Detroit, Michigan
Dimensions
Length overall: 37 ft
Waterline: 31 ft
Beam: 12 ft
Draft: 6 ft 10 in
Displacement: 12,034 lb
Ballast: 5,400 lb
Engine
Yanmar 3GM30F, 29 hp, diesel
V-drive, folding propeller
No hour meter
A Racer You Can Cruise
Ticker is a Tripp 37, one of only 9 custom-built by Barret Holby of Holby Marine. She was designed by William Tripp III, principal designer for Doug Peterson at the height of IOR racing.
Set up for racing, she comes with a full wardrobe of racing sails, including a carbon fiber mainsail and 152% genoa built in 2022 and hardly used, plus 3 spinnakers. A B&G Zeus2 color GPS chartplotter sits on a swivel mount for viewing from the cockpit, with 4 B&G Triton2 color displays.
She is just as comfortable cruising. The cockpit seats six safely aft, and she comes with a brand new Dacron mainsail and stackpack for easy shorthanded sail handling. Below, the interior is all unfinished teak, with a proper door to the head for privacy and an Origo stove for hot meals and coffee. A swim ladder is included.
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. Main Description
Ticker is a Tripp 37, drawn by William Tripp III and built by Holby Marine. Only a handful of these boats were finished, and this one was completed in 1986. She is a masthead sloop with a fin keel and a spade rudder, built in fiberglass to be sailed hard and still lived aboard. She lies at Bayview Yacht Club in Detroit.
On deck she is a proper performance cruiser. Length is 37 feet, waterline 31 feet, and beam 12 feet. Draft is 6 feet 10 inches. Displacement is 12,034 pounds, with 5,400 pounds of ballast. The rig is the class masthead sloop, with a reported sail area of about 645 square feet.
Auxiliary power is a Yanmar 3GM30F diesel, 29 horsepower, driving through a V-drive to a folding propeller. There is no hour meter aboard, so no engine-hour figure is stated.
Below, the Tripp 37 is laid out as a racer that can cruise: a workable galley, a head, and berths for a small crew, finished in the straightforward way Holby built these boats. She is meant for club racing on the lakes and for a weekend passage, not for a marina that never leaves the dock.
Ticker is in Detroit, Michigan. Showings can be arranged by appointment.
SPECIFICATIONS
Name: Ticker
Designer: William Tripp III
Builder: Holby Marine
Model: Tripp 37
Year completed: 1986
Rig: Masthead sloop
Hull: Fiberglass, fin keel, spade rudder
Location: Bayview Yacht Club, Detroit, Michigan
Dimensions
Length overall: 37 ft
Waterline: 31 ft
Beam: 12 ft
Draft: 6 ft 10 in
Displacement: 12,034 lb
Ballast: 5,400 lb
Engine
Yanmar 3GM30F, 29 hp, diesel
V-drive, folding propeller
No hour meter
Bluewater Yacht Sales is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Engel & Völkers Yachting. It is offered as a convenience by this broker/dealer to its clients and is not intended to convey direct representation of a particular vessel
Listing MLS by Yachtr.com